Mobile hydraulic loading and unloading bridge is a special equipment for forklifts to move directly from the ground to the carriage when forklifts load and unload trucks. It can transfer the loading and unloading operation site at any time to realize fast loading and unloading of goods. Using the forklift traction or implementation, the mobile hydraulic boarding bridge can be easily transferred to the working position, forklift can freely pass the boarding bridge, driving between the truck and the ground, to achieve fast and safe loading and unloading of goods. Mobile hydraulic landing bridge using manual hydraulic power, no external power supply. Shake the manual pump, ramp Angle increase, rotate open hydraulic valve, slope Angle decrease. Thus, the height of hydraulic boarding bridge can be adjusted from 1000mm~1800mm to meet the requirements of vehicles of different heights.

However, in the process of using the boarding bridge, we can not relax our vigilance, because there are many taboos that we can not touch in the use, here I give you a summary as follows:

One, before the mobile boarding bridge and truck docking, the board should be in the upturn state.

Two, before the use of the need to check three aspects: test whether the hydraulic system lifting flexible; Whether there is oil leakage phenomenon; Pressure relief valve is running smoothly.

3. Before loading and unloading the cargo, attach the board to the freight car, link the safety chain to the freight car, adjust the brake pad of the boarding bridge, and then start the operation.

Iv. In the process of operation, when the forklift is driving on the boarding bridge, the speed should be slow and steady. It is strictly prohibited to go down in neutral gear, and the cargo fork should be adjusted to an appropriate height to avoid contact with the deck of the boarding bridge.

Five, strictly according to the rated load of the boarding bridge, can not overload, so as not to cause damage to the boarding bridge.

Vi. During the operation, people should not stand around the boarding bridge, at least 2-3 meters away from it;

Seven, every month on the boarding bridge for a comprehensive inspection, to prevent off welding, oil leakage, lubricated parts appear, if found to deal with immediately, to avoid failure in the process of work.